10.04.2005: "USB Logic Analyzer"
The goal of this project is to continue design for a USB logic analyzer to be used in the junior labartory. The design uses an Opal Kelly XEM3001 FPGA board which communicates over USB 2.0 to a GUI written in C#.
The project was initially started by Jason Nielsen and Jeff Earleson in 2005. Previous work on this project has been recorded on their project website. Jeff Earleson will be working on the hardware part of the project again as an external consultant/designer. Shom and Jeff will both post updates on the their respective part of the project. Shom will be responsible for all deliverables pertaining to the Capstone Senior Project.