Project Specifications

Note: The project has been scaled back due to funding problems.
           The specifications will be changing continuously.

• Stroke
• approximately 12 inches
• Load
• 1 pounds to 100 pounds
• Rate Speed
• 12 inches per second
• DC Voltage
• 24 to 30 V
• Optional Features
• Holding Brake
• H-Bridge
• Peak current rating of 35.2 A or better
• Handle Voltage between 90V or 120V

Note: The above specifications are the ideal specifications for a future phase.
         The specifications that we are going by for phase 1 are listed below.
 

• Electrak 1 Actuator
• Potentiometor
• Weight capacity 25 lbs
• Voltage: 12VDC
• Stroke: 6 inches
• Current Draw: 5.6A
• IRF640 Hexfet Power MOSFET
• Vdss: 200 V
• Rds (on) : 0.18 ohm
• Id: 18 A
• IR2213(S) High And Low Side Driver
• Voffset: 1200 V max
• Io: 1.7A/2A
• Vout: 12 - 20V