Wireless Terminal and PC Interface using VLSI


Home

Project Proposal
Addressing

Resources

Bios

Portfolio

Sitemap

   
Figure 1: Circuit used in LogicWorks for address testing

With the circuit in Figure 1, the expected output should be as follows:

  • Z300h
    • = '1' when A9=A8=1 and A7=A6=...=A0=0
    • = '0' otherwise
  • Z302h
    • = '1' when A9=A8=A1=1 and A7=A6=...=A2=A0=0
    • = '0' otherwise
The output shown in Figure 2 confirms this behavior.


Figure 2: LogicWorks output from Figure 1

The circuit in Figure 1 can be downloaded in the LogicWorks .cct format from the Downloads page.

Back to Addressing